vice grips on the shaft under the car, and a deep well socket with extension on the top. If you have a 3/8 impact, it should make short work of...
Sorry for the delay, super busy with work. Any reputable auto parts store will have the water pump for that engine.
Not the power steering, the water pump. Watch the video (or go out and look at your car) and you will see that pulley wobbling. With the engine...
Your water pump bearing is dead. Replace the water pump and all will be well. You can see the WP pulley wobbling.
Welcome to the forum! Post up some pics when you get a chance!:welcomefl:
Interesting. Never heard of that relay causing a non function issue. Thanks for sharing!
I know this thread is a month old, however I wanted to advise. There are 3 engagements on a TC. The input shaft, the pump gear (stationary) and...
This sounds like a grounding issue. If there is no ground, it will find another path to ground which results in a constant draw/drain that lights...
If you already have the covers, any paint shop should be able to make these. The font is called "Oramac". They should be able to create the...
Hello Kristian, If this were me, I would take it to a driveline shop that has a certified welder. This axle has a cast iron center with steel...
Hello @CraigtheponyThe 95 PCM is OBD1 even though it has the OBD2 ALDL connector. If you are using an OBD2 scanner, it will not communicate....
I know you said you replaced the fuel pump, but have you put a pressure gauge on the rail to see what your pressure is?
The clunky sound could be the A.I.R. system/pump. Unless you have sniff tests during your inspections, you can safely unplug the pump and as long...
Ah, the classic idler pulley squeak (or just belt squeak).For the ABS Inop light, that could be a number of things from a bad ABS sensor to the...
Hello Chris. I edited your post and removed the HTML, which we do not allow on this website for security reasons. All you need to do is copy the...