Link to data log in google sheets. Click box with arrow select account open with android file manager or other program. As reached closed loop...
In the past i just took old set covers an cut top out but with center bolt covers cant do that
insulator brand new white electrode new looking also outer casing carboned entire exposed area soaked in gas. Factory gapped plugs checked them...
Thats exactly how i have always done them but read this other way i did this time. Was trying to avoid the oil mess of valve cover off while...
Tried to upload datalog in csv and xdl formats both said not allowed format types
Also preset lifters cold new engine spin pushrod till slight tension doesnt turn as easy. Then 1/2 turn. They were all noisy so after some run...
Number 2 an 4 looked perfect 6 was gas fouled 8 my arms wont show thru to remove it would have to remove 6 subframe bolts and lower engine to...
93 and some 94 is obd1. some 94 and 95 aldl(not compatible with obd scanners). Some 95 obd2 plug aldl ecm. Again not compatible with obd scanners....
Same here fyi do not use generic opti i have bunch them high resolution was no good brand new. And china version worst its wired backwards...
Ok so i have freshened engine replaced bearings guide seals and gaskets etc. Got engine back together put in an fired right up. Ran great for 2...
Engine mounts can easily be made with engine in place cut out cardboard to right dimensions then trace onto steel. The bigger problem is u will...
Forgot to mention a very rich condition will pass emissions even tho it's puking out raw fuel. It's the amount of hydro carbons that's checked so...
First your car will run like crap if u just straight pipe cat this includes coring it out. So by adding cats back in it will actually run smoother...
If its original theres a good chance plugwire will fall apart trying to remove it. Replace with oem only to avoid more problems. Static false...