Ask A Question / Post Topic

clutch job airbag dilema pulling console pulled wire out of airbag modual

Discussion in '4th Gen Camaro LT1 (1993-1997 Camaro)' started by Driveitlikeustoleit, Mar 10, 2019.

  1. Driveitlikeustoleit

    I was doing new clutch pulled console to get to shifter. and couldnt see feel or find disconect
    and pulled wire clean out of modual .
    The whole clip yanked out of box.
    So will the car be drivable ?
    and is it possible to fix box?
     
    Driveitlikeustoleit, Mar 10, 2019
    #1
    Tags:

  2. Tony Staff Member Super Moderator

    That was kind of a cryptic post, please try to complete sentences so that we can better understand what it is you are trying to explain. If I had to guess, you pulled the wire out of one of the ports in the plug that plugs into the ABS module. If this is the case, just replace the plug or get the tools to put a new terminal on the wire and plug it back in. Otherwise, take the kick panel off of the driver side and unplug the yellow plug just in case to keep the airbag from blowing up in your face while you are driving down the road. And do NOT put any passengers in the seat next to you unless you unplug that airbag as well.
     
    Tony, Mar 10, 2019
    #2

  3. Driveitlikeustoleit

    My camaros a 97 .
    It has a airbag sensor .
    It says airbag sensor on it
    Right behind the gear shifter .
    It has a harness big yellow plug in back a blue wire Im guessing is a ground and instead of slipping off terminal
    the whole terminal pulled out .
    it looks to be a ground that was spot welded to inner side of outer chassy.
    The terminal was out in open with nothing to insulate it.
    Please explain where kick panel is ?
    and if pulling a airbag fuse would do same thing ?
    I just pulled the fuse.
     
    Driveitlikeustoleit, Mar 10, 2019
    #3

  4. Tony Staff Member Super Moderator

    Hope someone can help you out. Sorry I couldn't help further.
     
    Tony, Mar 10, 2019
    #4

  5. Driveitlikeustoleit

    Anybody with a 97 to 02 wanna give it a shot?
     
    Driveitlikeustoleit, Mar 11, 2019
    #5

  6. Driveitlikeustoleit

    I figured it out.
    Had nothing to do with air bag sensor .
    It was the ebrake light switch
    I pulled half the switch out.
    Didnt mean to mislead you Tony Thanks
    I was going by how long the wire was.
    and what looked like a arc mark.
    Pulling the console on a 97 is a nightmare.
    Even after unscrewing it the front is pinned under dash
     
    Driveitlikeustoleit, Mar 11, 2019
    #6
Loading...
Similar Threads - clutch airbag dilemaForumDate
My clutch is t disengaging4th Gen Camaro LT1 (1993-1997 Camaro)Jun 11, 2024
Clutch issue4th Gen Camaro LT1 (1993-1997 Camaro)May 29, 2024
Backwards Clutch Symptoms4th Gen Camaro LT1 (1993-1997 Camaro)Mar 27, 2024

Share This Page

Loading...