What is the best way to get the moisture out of lens covers?
Moisture keeps getting in, and i checked for cracks and there wasnt any. But at the top of the lens there is a gap where water gets in sometimes...

 

What's up? I had that problem in my TA. Take the lenses out and let them air dry by a fan in your house for a day or two. Then get some super glue and run it along the seam of the light because that is the only possible place for a leak unless you have a crack in them. Make sure you go all the way aorund the lens and don't drip any on the outside because once it sets up you can't get it off

 

yeah i ended up taking them both off and siliconing the good one, and then i put the other one in my attic for a few days, then siliconed that one.
thanks man