Ask A Question / Post Topic

Top shock bolts

Discussion in '3rd Gen Camaro (1982-1992 Camaro)' started by dwwebster, May 16, 2024.

  1. dwwebster

    I need to replace my rear shocks and springs. I loosened (but not removed) the lower bolts and brake line bolt so that part would be ready. But I can't get the upper shock bolts loose. 1984 Camaro with aftermarket convertible, and the frame for the top is making access difficult. I can't get a small wrench on the top and have room to get a larger wrench on the bottom, so I tried to put vice grips on the top but it is still spinning. I ran out of PB Blaster so I put WD40 on 1hr before starting. Any suggestions?

    driver rear shock bolt.jpg #ad


    passenger rear shock bolt.jpg #ad
     
    dwwebster, May 16, 2024
    #1
    Tags:

  2. Tony Staff Member Super Moderator

    vice grips on the shaft under the car, and a deep well socket with extension on the top. If you have a 3/8 impact, it should make short work of those.
     
    Tony, May 21, 2024
    #2

  3. dwwebster

    I got them off using the impact gun. Once they were off this job was quite easy! Gonna hit the front ones this weekend. Hope it is just as easy
     
    dwwebster, May 21, 2024
    #3
Loading...
Similar Threads - shock boltsForumDate
Strut and Shock Rates For 83 Z/283rd Gen Camaro (1982-1992 Camaro)Nov 22, 2007
blown out shock mounts3rd Gen Camaro (1982-1992 Camaro)May 29, 2006
Regular Shock/Strut Job3rd Gen Camaro (1982-1992 Camaro)Sep 17, 2005

Share This Page

Loading...